enquiry list

Send Enquiry

FREE DELIVERY FOR ORDERS ABOVE $300.00

sales@mci-global.com (65) 6299 3438
  • New

PIE 830

PieCal

Multifunction Dual Channel Process Calibrator mA • V • TC • Ohms • RTD • Hz • pH • Pressure


For order quantity more than 50, please feel free to request wholesale quotation

Back to listing
  • description
  • key features

description

First Multifunction calibrator with 5 troubleshooting tools including a universal transmitter:

  • 1 Detect hidden loop problems with Patented Current leak detection technology
    Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments!
  • 2 Check all loop parameters at once with the LoopScope
    Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE!
  • 3 Automatically detect 2, 3 or 4 wire RTDs
    Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor.
  • 4 Swap out faulty transmitters to diagnose control issues
    Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting.
  • 5 Troubleshoot wiring problems without a multimeter
    Built in continuity checker with beeper quickly finds broken wires or shorts in instrumentation wiring.
  • Lighten up your toolbox
    Pocket sized calibrator replaces toolbox of single function devices; dual channels allows for use of only 1 calibrator instead of 2!
  • Technician friendly operation
    Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
  • Use it as a milliamp and voltage calibrator
    Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV
    Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV
    Simulate 2 Wire transmitters
    Power up transmitters and loops with built in 24 V power supply
    Simplify HART hook ups with built in 250 ohm resistor
  • Calibrate directly in temperature (°C & °F)
    The PIE 830 works with the instruments you use.
    Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
    RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
    Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
  • Checkout flow and vibration systems
    Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
    Hz, 9999.9 Hz, & to 20.000 kHz
  • Simulate pH probes into transmitters & analyzers
    Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV
  • Measure pressure with optional pressure modules
    32 modules for gauge, differential, compound and absolute pressure
  • Quickly set any three outputs plus automatic stepping & ramping
    Easily set any value quickly with the adjustable “DIAL”; store any three output settings for instant recall with the EZ-CHECK™ switch.
    Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span.
    Select RAMP to smoothly increase and decrease the output between Zero and Span.
    Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
  • Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures
    Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
  • Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)

key features

Advantages of the PIE 830 over the Altek 830 multifunction calibrator

  • Universal Transmitter feature – Unique to PIE
    Save time and money by using this feature to keep a process running while troubleshooting problems.
  • Loop Diagnostics – Unique to PIE
    Only multifunction calibrator that can power up a loop and tell you that there is moisture, corrosion or a ground fault causing current to leak to ground.
  • Simulates a pH probe
    Calibrate pH tranmitters & analyzers before attaching probe to verify that each is working correctly.
  • Higher Accuracy
    Accurate to 0.006 mA, Pt 100 Ohm RTD to 0.2°C/0.4°F, Type K to 0.3°C/0.6°F, pH to 0.003 pH
  • Isolated internal 24 V loop supply
    Calibrate 2-wire transmitter with electrical isolation between the input and the output for more accurate and stable readings.
  • Wider range of pressure modules & scales
    Choose from 32 different modules with up to 32 engineering units for greater compatibility with your processes.
  • Works with more instruments
    Compatible with smart transmitters, multichannel recorders, PLCs and DCSs – GUARANTEED! More Thermocouple & RTD ranges with 0.1° resolution and better accuracy.
  • Smaller & lighter
    Pocket sized and easier to carry
  • LED for optical pickups
    LED flashes green in sync with frequency output. Illuminates red for overload conditions.
  • Easier to hook-up
    Diagrams are shown on the display indicating where to plug in the test leads.